<< Back to FAQ Home


Prev | Page 2 of 2

11) What firearms will the 190 Series work with?
The LT-100C and MP-400B lasers will work with all firearms. The LTX Laser will only work with .38, .357, 9mm, .40, and .45 caliber weapons.

12) What is included in the 190-1 and 190-3 Systems? What is also needed in order to operate the 190-1 System?
190-1 System*
. 190 Case
. 3 Paper Targets*
. LT-100C
. Allen Wrench
. Four LR44 Batteries

190-3 System
. 190 Case
. 3 Paper Targets*
. LTX Laser
. Allen Wrench
. One V377 Battery

*A transmitter rod is not included with the 190-1 System and must be purchased in order to operate it. Additional targets are also available separately.

13) What is the approximate size of the paper targets?
The approximate size of the paper targets are 36 square inches.

14) What is the distance scale with the paper targets?
For every 1 foot you are away from the target, it is congruent with being 10m from the target.

15) What is the maximum recommended shooting range from the 190 Series?
The maximum recommended shooting range from the system is 30 feet.

16) What modes does the 190 Series operate in?
Hit Mode: The software will detect hits from the target and display them in real time. The laser transmitter is set to "Training" mode.

Trace Mode: The software will only display the current location of the laser point. The laser transmitter is switched to "On" mode*.

Plot Mode: The software will plot out the movements of the laser point over time. The laser transmitter is switched to "On" mode*.

* The LTX laser does not have an "On" mode. It only operates in "Training" mode.

Prev | Page 2 of 2